EF651625 3.6Volt LISOCL2 Prismatic Battery LTC-3PN With Pins Terminals

EF651625 Customize 3.6V lithium thionyl chloride ( LISOCL2) Prismatic primary battery LTC-3PN with pins terminals

Compatibility:

 LTC-7PN, BL-7PN,EF651625

 Soldering pin interval +/- pin 7.6 mm, -/- pin 10.2 mm       

1. High and stable working voltage

    The standard voltage is 3.6V and the working voltage maintains an obvious stability during the entire service life; more than 90% of the battery capacity is output on a high-voltage platform with almost constant voltage;

2. Wide temperature range

    Can be used at temperatures between -55°C and 85°C.

3. High energy density

   The specific energy of lithium-thionyl chloride battery is as high as 700Wh/kgL.

4. Better storage life and reliability

    With particularly low self-discharge characteristics, the annual self-discharge rate is less than 1%, and the shelf life of the battery has been confirmed to be stored for more than 10 years at room temperature.

5. Hermetic glass-to-metal sealing

6. Good security, safety

    Does not contain mercury, cadmium, lead and other heavy metals, Non-flammable electrolyte, no environmental hazards.

In all: High energy density since no design compromises necessary to accommodate recharging.

Best alternative for low cost, low drain applications such as meters or hearing aids.

The obvious choice for single use applications such as guided missiles and military ordnance.

Low initial cost

Convenient.

Wide availability of standard products

Warning: 

Do not recharge, short circuit, crush, disassemble, heat above +125℃, incinerate,or expose contents to water. Dispose of used batteries properly in case of explosion, burn and leakage.

      Main Applications: 

Computer memory protection

Medical implants

Heart pacemakers

Defibrillators

Utility meters

Watches

Cameras

Calculators

Car keys

Security transmitters

Smoke alarms

Aerospace applications

Because of its superior performance characteristics Lithium technology is replacing older, traditional technologies in an ever widening range of applications.

Pictures:

EF651625 Customize 3.6V Li-SOCL2 Prismatic primary battery LTC-3PN with pins terminals

3.6V Non-rechargeable lithium thionyl chloride ( LISOCL2)Prismatic Battery with 4 U solder pins terminals

We can add the Pin, wire and connector on the battery according to requirement

Why Choose us?

Company Advantages:

Our certifications:

Our office and factory:

You may also interested in other lithium batteries:

Have not find a suitable battery for your prototype?
	Let's talk about what SER experience can do for you!